Network Cabling Services

PARTNER

Structured cabling installation done to standard

Cabling is the part of the network that’s quietest when it’s right and impossible to ignore when it’s wrong. Crossed pairs that pass at 100Mb/s and fail at 1Gb/s. Patch panels labelled wrong from a build five years ago. Fibre runs that test fine cold and degrade at 45°C. The data centre cable tray that has been “managed” by stuffing more bundles in until something falls out. Most of our cabling work in KSA is fixing what someone built quickly and leaving a documented system the next IT team can actually maintain.

Unifiedway delivers structured cabling installation services across the Kingdom — Cat5e, Cat6, Cat6A, fibre optic (single-mode and multi-mode), data centre cabling, audio-visual cabling, and the certification testing that proves what was installed actually meets standard.

Why structured cabling matters

A network is only as good as its physical layer. Cat6 vs Cat6A decides whether you can run 10GbE in three years without re-cabling. Patch-panel-vs-direct-termination decides whether moves-adds-changes are a 30-second job or a half-day visit. Cable management decides whether your data centre stays at 22°C with the cooling you have or starts hitting thermal limits. Documentation decides whether troubleshooting takes 10 minutes or 10 hours.

For Saudi organisations growing into new offices, refitting existing premises, or building project-site infrastructure at NEOM, the Red Sea, or Qiddiya, getting cabling right at the start avoids years of operational pain.

What’s included in our cabling services

Copper structured cabling

Cat5e, Cat6, and Cat6A horizontal cabling for offices, hotels, hospitals, schools, retail, and industrial environments. We design to TIA-568 standards, install to manufacturer specification, and test against TIA/EIA performance categories with certification reports.

Fibre optic cabling

OM3, OM4, OM5 multi-mode fibre and OS2 single-mode fibre for backbones, data centre, and inter-building runs. We handle fusion splicing, mechanical termination, OTDR testing, and certification.

Data centre cabling

ToR (top-of-rack), MoR (middle-of-row), and structured-zone cabling architectures. Cable management, labelling, environmental design, and the operational discipline that keeps a data centre maintainable through years of moves and adds.

Backbone and inter-building cabling

Multi-mode and single-mode fibre runs between buildings on a campus or compound, including conduit work, splice enclosures, and pathway design.

Audio-visual cabling

HDMI, DisplayPort, and HDBaseT runs for boardrooms, training rooms, digital signage, and lobby video. Often combined with the data cabling project.

Cable management and remediation

For data centres and comms rooms that have grown organically, we deliver remediation projects: re-routing, re-labelling, and re-documenting so the next change isn’t a 4-hour archaeology dig.

Certification and testing

Fluke DSX-series and OTDR testing with certification reports your auditors and warranty providers will accept. Every link delivered with a printable test certificate.

Pathway and containment

Tray, basket, conduit, and cable-management systems designed to current and projected capacity.

Documentation

As-built drawings, port maps, labelling schemes, and digital records integrated with your IPAM/CMDB if requested.

How we deliver

1. Site survey — physical walkthrough, measurement, and capacity planning.
2. Design — drawings, specifications, BoQ, and a project timeline aligned to your construction or fit-out programme.
3. Procurement — cable, connectors, patch panels, racks, and management hardware from manufacturer-authorised channels.
4. Installation — trained technicians working to TIA-568 and BICSI best practice, supervised by a NICET-certified lead.
5. Termination and labelling — every port labelled to the agreed scheme, both ends.
6. Testing and certification — full link certification with reports.
7. Handover — drawings, certs, and a maintained record system handed to your IT team.

Industries we serve

• Hospitality — hotel new-build cabling for guestrooms, back-of-house, and conference facilities.
• Healthcare — hospital and clinic cabling with redundancy and biomedical-device requirements.
• Government and semi-government — high-spec installations to specified standards.
• Education — schools, universities, and training campuses.
• Manufacturing and logistics — industrial-grade cabling tolerant of dust, vibration, and temperature extremes.
• Financial services — branch and HQ cabling with segregation for trader voice and compliance recording.
• Retail and distribution — branch fit-outs and refits.
• Data centres — purpose-built facilities and enterprise server rooms.

Why Unifiedway for cabling

Our cabling teams are NICET-trained and BICSI-aligned, working under PMP-certified project managers. We hold partnership certifications with major cabling manufacturers — Panduit, Commscope, Belden, R&M, and Legrand — which gives our installations 25-year manufacturer warranties when designed and installed to specification. We deliver projects across the Kingdom, including remote project sites where logistics matter as much as technical capability. Our crews work to construction safety standards required on KSA project sites and are familiar with the documentation regimes giga-project main contractors require.

Frequently asked questions

Cat6 or Cat6A — which should we install?

Cat6A for new builds where you want headroom for 10GbE without re-cabling. Cat6 if budget is tight and 1GbE is the long-term plan. The cost difference at install time is small; the cost of re-cabling later is substantial.

Multi-mode or single-mode fibre?

Multi-mode (OM4/OM5) for short runs inside buildings. Single-mode (OS2) for inter-building, campus backbones, and longer distances. Most modern data-centre designs use a mix.

Do you provide warranties?

Yes. When we install with manufacturer-authorised components and design to specification, you get the manufacturer’s 25-year extended warranty plus our installation warranty. Certification reports are part of the warranty registration.

Can you work to giga-project specifications?

Yes. We have delivered cabling on giga-project sites and are familiar with the materials approval, safety documentation, and quality regimes the main contractors require.

How long does a cabling project take?

Office fit-out (50 users): 1–2 weeks. Hotel new-build (200 rooms): 2–4 months phased with construction. Data centre: scoped per project.

Will you certify existing cabling?

Yes. Many clients ask us to certify what someone else installed — useful before warranty claims or before adding load. We test, document, and identify any links that fail certification.

What does cabling cost?

Per-drop pricing is the simplest way to budget. Free scoping call to size the project.

Take the next step

If you’re planning a fit-out, refit, or new build, get cabling scoped early — pulling cable while walls are open is half the cost of doing it after. Pair cabling with networking services, VoIP installation, and CCTV installation for a complete physical-layer build.